UCC28220PW Overview

It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 8.4V~14.5V and has a 8.4V~14.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~105°C TA. A switching controller such as this can switch at a value of 200kHz~2MHz . The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Ramp, Soft Start which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. UCC28220 can be used to locate other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 3.45V. It's important to remember that the dc dc regulator's normaloutput current is 10mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 77 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 2MHz frequencies. A dc switching in a dormant state uses 3mA. For nominal working status, the input voltage can be set as 48V. A supply voltage of 12V is required. Current supplied to the controller should not exceed 6mA.

UCC28220PW Features

Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 77 %
Frequency: 2MHz

UCC28220PW Applications

There are a lot of Texas Instruments UCC28220PW DC to DC converter applications.

• Surface processing equipment
• Computer application technology
• Wide-range voltage regulation circuits
• Computer monitoring equipment of building
• Elevator lighting
• Electrical distribution systems
• Product testing
• Emergency lighting monitoring equipment
• Correction machines
• Energy management systems