UCC28220QDRQ1 Overview

It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 8V~14.5V are the dc control's supply voltage and operating voltage, respectively. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 200kHz~2MHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Ramp, Soft Start which allows efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. UCC28220 can be used to locate other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. 8V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 3.3V. In most cases, the output current of the dc dc regulator will be 100A, so note that when you start the project. A duty cycle set at 90 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulators have a maximum frequency of 2MHz. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. The supply voltage must be 12V. It is not recommended to supply more current to the controller than 6mA. Tests are conducted at 3.45V to determine the dc controller's highest voltage output.

UCC28220QDRQ1 Features

Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %

UCC28220QDRQ1 Applications

There are a lot of Texas Instruments UCC28220QDRQ1 DC to DC converter applications.

• Product burn-in
• Automatic testing equipment
• CMM
• Scientific testing
• Current source circuits
• Photovoltaic power
• Alternators
• Network technology
• Solar power plants
• Serial communication converter