UCC2892DR Overview

This switching controller fits most application requirements since it is packaged in a 16-SOIC (0.154, 3.90mm Width) package. There is sufficient capacity to generate switching controller for outputs 1. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). 8.5V~16V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. A switching controller such as this can switch at a value of 250kHz . The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Search for "UCC2892" to find other relevant dc to dc converter ics. In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. A 11.1V voltage of DC regulator was detected in the test statistics. You should note that the dc dc regulator's usual output current is 150mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 70 %. Switching controller operates at 1MHz Hz. When running the voltage regulator dc to dc in a circuit, users should apply 12V to ensure safety and reliability. You can set the input voltage to 110V for nominal working status. A supply voltage of 12V is required. It is not recommended to supply more current to the controller than 3mA.

UCC2892DR Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 70 %
Frequency: 1MHz

UCC2892DR Applications

There are a lot of Texas Instruments UCC2892DR DC to DC converter applications.

• Analog precision reference circuits
• Smoke prevention equipment
• Gear/thread machining machines
• Series voltage regulation circuits
• Alternators
• Direct power supply system
• Grinders
• Various precision measuring detectors
• Automatic plug-in machines
• Product testing