UCC2892DRG4 Overview
Capsuled in the SOIC package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Using this switching controller, it is possible to switch at 1MHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Pins number 16 of switching converter in total. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 73 % during power-up and power-down. Switching controller operates at 1MHz Hz. Users should apply 12V to operate the voltage regulator dc to dc safely and reliably. At least -40°C°C is recommended. At105°C, dc regulator should run. 1 functions are available in total for the switch converters. We design voltage regulators switchings with 16 pins. The controller can set a maximum frequency of 1MHz. It is possible to set the input voltage as 110V for nominal working statuses. With 150mA inputs, switching controller is ideal. It outputs a value of 11.1V in normaloperating procedures. Switching controller is necessary to provide a voltage of 12V. There should be 3mA current exceeding 3mA supplied to the controller. Voltage maximum is rated 14.5V.
UCC2892DRG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz
UCC2892DRG4 Applications
There are a lot of Texas Instruments
UCC2892DRG4 DC to DC converter applications.
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
- Various CNC machine tools
- Machining centers
