UCC2893DR Overview

Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). 8.5V~16V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 250kHz position. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, On Time Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. UCC2893 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter type is specifically Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 11.1V voltage. normally, the dc dc regulator's output current is 150mA, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 73 % to ensure reliability during power-up and power-down. A frequency of 1MHz is used by the switching controller. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. 110V is the nominal working voltage. Switching controller is necessary to supply a voltage of 12V. There should be 3mA more than 3mA amps of current supplied to the controller.

UCC2893DR Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz

UCC2893DR Applications

There are a lot of Texas Instruments UCC2893DR DC to DC converter applications.

• Post equipment
• Motor controller circuits
• CMM
• Hydro power
• Planers
• Electrical distribution systems
• Magnetohydrodynamic power
• Imported equipment
• Analog precision reference circuits
• Pipe bending machines