UCC2893PWRG4 Overview

With its 16-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.5V~16V and has a 8.5V~16V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 250kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, On Time Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "UCC2893" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 11.1V. If you are starting a new project, you should note the dc dc regulator's typical output current is 150mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 73 %. Switching controllers work at 1MHz Hz. When running the voltage regulator dc to dc in a circuit, users should apply 12V to ensure safety and reliability. A nominal working status is achieved when the input voltage is set to 110V. There is a requirement for a 12V supply voltage. It is not recommended to supply more current to the controller than 3mA.

UCC2893PWRG4 Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz

UCC2893PWRG4 Applications

There are a lot of Texas Instruments
UCC2893PWRG4 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots