UCC2897PWR Overview

It comes in a 20-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 8.5V~14.5V voltage are supplied and operated. A -40°C~105°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 250kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, On Time Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 20 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. UCC2897 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 20 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 900mV. You should note down the dc dc regulator's usual output current of 2A when you start a project. A duty cycle set at 74 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 1MHz. As a result, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE so that the need can be met more directly. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V. You can set the input voltage to 120V for nominal working status. Voltage 12V is required for supply. There should be 3mA more than 3mA amps of current supplied to the controller.

UCC2897PWR Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Enable, On Time Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UCC2897PWR Applications

There are a lot of Texas Instruments
UCC2897PWR DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers