UCC2897RTJT Overview

In the 20-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 8.5V~14.5V. Suitable for a -40°C~105°C TA dc switcher. Using this switching controller, it is possible to switch at 250kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, On Time Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the QUAD position. 20 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. UCC2897 can be searched for other relevant dc to dc converter ics. In total, switching converter has 20 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 900mV voltage based on test statistics. If you start a project, note down the dc dc regulator's usual output current of 2A. The maximum duty cycle of this voltage regulator dc to dc is set to 74 % to ensure reliability during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 1MHz frequency setting on the switching controller. DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the need. It is suggested that users apply 12V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Dormant dc switchings use 2mA. Input voltage can be set to 120V for nominal working status.

UCC2897RTJT Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Enable, On Time Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UCC2897RTJT Applications

There are a lot of Texas Instruments UCC2897RTJT DC to DC converter applications.

• Handheld GPS
• Injection molding machinery
• Constant current circuits
• Product testing
• Product burn-in
• Hydro power
• Digital video recorders
• Emergency lighting monitoring equipment
• Access control systems
• Overvoltage protection circuits in TV sets