UCC28C40DGK Overview

The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. 6.6V~18V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~105°C TJ rating. Using this switching controller, it is possible to switch at Up to 1MHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Searching "UCC28C40" will return other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 18V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. A frequency of 1MHz is used by the switching controller. DC to DC voltage regulator has the value of ALSO OPERATES IN CURRENT MODE to better satisfy the requirement. For nominal working status, the input voltage can be set as 18V.

UCC28C40DGK Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE

UCC28C40DGK Applications

There are a lot of Texas Instruments UCC28C40DGK DC to DC converter applications.

• Correction machines
• seismic instrument power circuits
• Series voltage regulation circuits
• Power supplies of electronic gadgets
• Imported equipment
• Ball screw pair
• Planers
• Telecommunications equipment
• Surface processing equipment
• Sensitive electronic devices