UCC28C41DGKR Overview

This switching controller fits most application requirements since it is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. For outputs of 1, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 6.6V~18V. Workable in an dc switcher where -40°C~105°C TJ is the -40°C~105°C TJrm. The switching controller can be switched at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 8 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics can be found by searching "UCC28C41". Total pins of switching converter are 8. In particular, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 18V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is 1MHz frequency setting on the switching controller. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE so that the need can be met more directly. A nominal working status is achieved when the input voltage is set to 18V.

UCC28C41DGKR Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE

UCC28C41DGKR Applications

There are a lot of Texas Instruments UCC28C41DGKR DC to DC converter applications.

• Lathes
• Series voltage regulation circuits
• Wide-range voltage regulation circuits
• Gear/thread machining machines
• Program control systems
• Mobile phones
• Smoke prevention equipment
• Communication system
• Surge protection circuits
• Correction machines