UCC28C42P Overview

As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 9V~18V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~105°C TJ is the -40°C~105°C TJrm. The switching controller is capable of switching at the Up to 1MHz position. dc dc regulator can be generalized using Through Hole. Switching control is made easier with the dcdc regulator's Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "UCC28C42" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 18V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at 1MHz Hz. DC to DC voltage regulator has the value of ALSO OPERATES IN CURRENT MODE to better satisfy the requirement. As long as the dc switching is in a dormant state, it utilizes 2.3mA. It is possible to set the input voltage as 18V for nominal working statuses.

UCC28C42P Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE

UCC28C42P Applications

There are a lot of Texas Instruments
UCC28C42P DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery