UCC37325P Overview

In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.The packaging method is indicated by Tube.There is a mounting bracket in the way of Through Hole.Using a 4.5V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.Mosfet driver is based on 8 terminations.Numerous related parts are available for its base part number UCC37325.In this case, Through Hole indicates how the device is to be mounted.During design, it is configured with 8 pins.The device is specifically designed to operate at 14V volts.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current supported by the device is 4A.Considering its maximum power dissipation, 780mW shows its maximum capacity to transfer and conduct power loss without overheating.To increase stability, keep the supply current at 600μA.Based on its power supplies of 4.5/15V, it solves the problem of power supply failure for a variety of applications.The voltage it outputs is 300mV.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.Its input is characterized by STANDARD.

UCC37325P Features

Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 780mW

UCC37325P Applications

There are a lot of Texas Instruments UCC37325P gate drivers applications.

• Digitally controlled power supplies
• Portable Media Players
• Automotive Applications
• Isolated Supplies for controller area network (CAN),
• 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
• Power factor correction (PFC) circuits
• Isolated Supplies for Motor Control
• Industrial Motor Inverter - Power Tools, Robotics
• Head-up and Head mounted displays
• Motor Controls