UCC3807N-1 Overview

It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 6.9V~13.5V voltage are supplied and operated. A 0°C~70°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 202kHz . It is suitable for general dc dc regulator when it is set to Through Hole. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. UCC3807 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. 7.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 400mV. You should note down the dc dc regulator's usual output current of 100mA when you start a project. A duty cycle set at 81 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Through Hole makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 1MHz. DC switchings that are dormant use 1.3mA.

UCC3807N-1 Features

Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 81 %
Frequency: 1MHz

UCC3807N-1 Applications

There are a lot of Texas Instruments
UCC3807N-1 DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers