UCC38084DG4 Overview
It comes in the SOIC package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. The switching controller can be switched at 1MHz. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. In total, switching converter has 8 pins. This dc dc voltage regulator should be powered by a voltage of 4.3V. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. 1MHz is the frequency of the switching controller. The temperature should be at least 0°C. DC regulator should run at a temperature 70°C higher than 70°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 8 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 1MHz. A 1A input switching controller would benefit from it. When it is working normally, it outputs a value of 500mV. A maximum supply voltage of 15V is specified.
UCC38084DG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC38084DG4 Applications
There are a lot of Texas Instruments
UCC38084DG4 DC to DC converter applications.
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
