UCC38084DR Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 4.1V~15V volts and has 4.1V~15V supply voltage. Qualified to work in an dc switcher with 0°C~70°C TA. The switching controller can be switched at 200kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Frequency Control which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. 8 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. UCC38084 can be used to locate other relevant dc to dc converter ics. Total pins of switching converter are 8. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 4.3V. A 500mV voltage of DC regulator was detected in the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. 1MHz is the frequency of the switching controller.

UCC38084DR Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC38084DR Applications

There are a lot of Texas Instruments UCC38084DR DC to DC converter applications.

• Ball screw pair
• Television equipment
• Hydraulic presses
• Emergency lighting monitoring equipment
• Injection molding machinery
• Sensitive electronic devices
• Electrical power transmission
• Bending machines
• Analog precision reference circuits
• Automatic testing equipment