UCC3813DTR-0G4 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 6.9V~12V voltage are supplied and operated. A 0°C~70°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 46kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 8 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 10V. UCC3813 can be used to locate other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. 7.5V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 1V. You should note that the dc dc regulator's usual output current is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 1MHz Hz. The supply voltage must be 10V. A controller's current should not exceed 30mA.

UCC3813DTR-0G4 Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC3813DTR-0G4 Applications

There are a lot of Texas Instruments UCC3813DTR-0G4 DC to DC converter applications.

• Smoke exhaust equipment
• Combined machine tools
• Boring machines
• Bending machines
• Digital precision reference circuits
• Shearing machines
• Smoke prevention equipment
• Production lines
• Network technology
• Computer application technology