UCC3813PW-3G4 Overview

It comes in the TSSOP package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. The switching controller can be switched at 1MHz. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. In total, switching converter has 8 pins. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4V. Statistically, DC regulator outputs 4V volts. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 1MHz is the frequency of the switching controller. The temperature should be at least 0°C. DC regulator should run at a temperature 70°C higher than 70°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 8 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 1MHz. A 200mA input switching controller would benefit from it. When it is working normally, it outputs a value of 1V. A maximum supply voltage of 12V is specified.

UCC3813PW-3G4 Features

Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC3813PW-3G4 Applications

There are a lot of Texas Instruments
UCC3813PW-3G4 DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment