UCC3913DTR Overview

In the 8-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 8 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.The supply voltage 9.5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for -48V are available on the device.A feature of Auto Retry, UVLO describes it.The UCC3913 family includes it.During operation, 8 pins are used.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout programmable features.Presently, there is a sufficient supply of 1mA.As you can see, it is positioned in the direction of Surface Mount.An input voltage of -10.5VV is the maximum it can handle.Using a low supply voltage, such as -9.999kVV, will be feasible.There is a maximum current requirement of 20mA for it to operate.In the case of a 10V output voltage, high efficiency can be achieved.

UCC3913DTR Features

The terminal position of 8
Features of Auto Retry, UVLO
Programmable features of Circuit Breaker, Current Limit, Fault Timeout
Output voltage of 10V

UCC3913DTR Applications

There are a lot of Texas Instruments
UCC3913DTR hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems