UCC3973NG4 Overview

As per Tube's specifications, the package is designed accordingly.A low package cost makes the 8-DIP (0.300, 7.62mm) a popular choice among electronic manufacturers.PCB Through Hole is used to mount it.As a standard grade, it's referred to as Type CCFL Controller.An appropriate power supply voltage ensures that it operates normally.0°C~70°C should always be the default setting.It is still accurate at 80kHz~160kHz frequency.Its best part contains a number of UCC3973s.The 8-terminations are built into it.Functions are handled by the device in 1 mode.There is a 7mA setting on the device's supply current.It is the same pin number 8 for this component.In total, it has 8 pins.A constant source of 12V powers the component.There is a Switching Regulator or Controllers Subcategory for this item.In this case, 100mA is set as the output current.It can be operated with a minimum input voltage of 4.5V.It is possible to input a voltage maximum of 25V.Supply 12V is present on the device.

UCC3973NG4 Features

Mounting type of Through Hole
Supply voltage of 12V
Switching Regulator or Controllers subcategory

UCC3973NG4 Applications

There are a lot of Texas Instruments UCC3973NG4 Lighting Controllers applications.

• Lighting ballast
• DC buffering
• Smoothing
• UPS buffering
• To reduce power noise & signal noise
• Signal decoupling & power bypass
• Coupling or blocking
• DC link
• To enhance power efficiency
• Motor start