UCC5630AMWPG4 Overview

It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 9 termination. A well-known feature of the 36-BSOP (0.295, 7.50mm Width) is its low packaging cost. Materials used for packaging are the same as those used by Tube. The PCB is mounted using Surface Mount. It is recommended that the Operating Temperature does not exceed 0°C~70°C. Standard applications can be carried out with this SCSI, LVD, SE-qualified material. Normal operation is ensured by a 2.7V~5.25V Supply Voltage. Base Part Number UCC5630 is useful for finding related parts. There are specific uses for the 36 pins. A 9 signal line is one that is exclusively used for transmitting signals or intelligence, or for public or private communication. Optimal efficiency requires a supply voltage of 3.3V. On it is a Surface Mount-mount. It is common for computers and other communication devices to use pronged contacts, called 36 pins. It is necessary to have 3/5V Power Supplies in order for the system to operate. Its resistance is 105Ohm (Ω). As the device can operate at supply voltages of 20mA, it is suitable for a wide range of applications. It operates at a maximum current of 20mA.

UCC5630AMWPG4 Features

9 terminations
Tube package
UCC5630 family
36 pin count
9 signal lines
36 pins
3/5V power supplies

UCC5630AMWPG4 Applications

There are a lot of Texas Instruments
UCC5630AMWPG4 Signal Terminators applications.

• Data Routers
• Programmable logic controller
• Remote input module
• Data Networking
• PCI Cards
• Telecommunication Equipment
• Data Routers
• Data Switches
• Programmable logic controller and remote input modules
• High speed protected termination for digital input with serialized SPI output