UCC5640PW28TRG4 Overview

It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 9 termination. A well-known feature of the 28-TSSOP (0.173, 4.40mm Width) is its low packaging cost. Materials used for packaging are the same as those used by Tape & Reel (TR). The PCB is mounted using Surface Mount. It is recommended that the Operating Temperature does not exceed 0°C~70°C. Standard applications can be carried out with this SCSI, LVD-qualified material. Normal operation is ensured by a 2.7V~5.25V Supply Voltage. Base Part Number UCC5640 is useful for finding related parts. There are specific uses for the 28 pins. A 9 signal line is one that is exclusively used for transmitting signals or intelligence, or for public or private communication. Optimal efficiency requires a supply voltage of 3.3V. On it is a Surface Mount-mount. It is common for computers and other communication devices to use pronged contacts, called 28 pins. It is necessary to have 3/5V Power Supplies in order for the system to operate. Its resistance is 105Ohm (Ω). 5.25V requires a current supply to function properly.

UCC5640PW28TRG4 Features

9 terminations
Tape & Reel (TR) package
UCC5640 family
28 pin count
9 signal lines
28 pins
3/5V power supplies

UCC5640PW28TRG4 Applications

There are a lot of Texas Instruments
UCC5640PW28TRG4 Signal Terminators applications.

• Data Routers
• Programmable logic controller
• Remote input module
• Data Networking
• PCI Cards
• Telecommunication Equipment
• Data Routers
• Data Switches
• Programmable logic controller and remote input modules
• High speed protected termination for digital input with serialized SPI output