UCC5672MWP Overview

Termination with a 9 device, which matches the transmission line's characteristic impedance, is considered a 9 termination. Because of its low package cost, the 36-BSOP (0.295, 7.50mm Width) is widely used in the electronic industry. Tube's packaging is made of the same materials. Surface Mount is used for mounting it on a PCB. A maximum operating temperature of 0°C~70°C should not be exceeded. The material is SCSI, LVD, SE-qualified for standard applications. In order to maintain normal operation, there is a 2.7V~5.25V Supply Voltage provided. You can find related parts by using Base Part Number UCC5672. There are a number of 36 pins included for specific applications. In terms of 9 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. For high efficiency, it is recommended that the supply voltage is maintained at 3.3V. On it there is a Surface Mount-mount. Communication devices such as computers use 36 pins, which are pronged contacts. Power Supplies are needed to operate 3/5V Power Supplies. Here is the resistance of this electrical device: 105Ohm (Ω). As the device is able to operate on 35mA supply voltages, it can be used in a wide range of applications.

UCC5672MWP Features

9 terminations
Tube package
UCC5672 family
36 pin count
9 signal lines
36 pins
3/5V power supplies

UCC5672MWP Applications

There are a lot of Texas Instruments
UCC5672MWP Signal Terminators applications.

• Programmable logic controller
• Remote input module
• Data Networking
• PCI Cards
• Telecommunication Equipment
• Data Routers
• Data Switches
• Programmable logic controller and remote input modules
• High speed protected termination for digital input with serialized SPI output
• IEC61131-2 type 1, 2 and 3