This is an electronic component with a LQFP package.The uses of this product can be terminated with 176.A voltage of 1.9V is used as the supply voltage.There are pins on the 176 component.The configuration of the device includes 176 pins.In order for the device to operate at the frequency of 150MHz, it has been designed specifically.The mounting method of the device is Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.It is possible to supply as low a voltage as 1.81V to this device.There is a maximum voltage supply of 3.47V to this device.The device operates with a supply voltage of 1.9V.Data can be stored in this device's memory in 256kB format.The electric power supply is 1.93.3V.The 2 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.With this electronic part, additional features of ALSO OPERATES AT 1.8V SUPPLY AT 135MHZ can also be provided.A DIGITAL SIGNAL PROCESSOR, OTHER type UP/UC/Peripheral IC is employed in its uP/UC/Peripheral ICs.Memory type OTP, ROM is used by it.It is recommended to operate at a lower temperature than 125°C.It should operate at a temperature greater than -55°C.Industrial environments utili8e 8 timers for accurate feedback and event activation.An external source causes 3 interrupts.Keep its frequency below 150MHz at all times.To facilitate access to the devices internal properties, 56 GPIOs act as interfaces.A/D converters with 16 are used in this device.
V62/05601-03ZE Features
Supplied in the LQFP package Operating supply voltage of 1.9V DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics 3 external interrupts
V62/05601-03ZE Applications
There are a lot of Texas Instruments V62/05601-03ZE DSP applications.