V62/06675-01XE Overview
In order to make transportation easier, it is packaged in SOIC .A comparator with an output type of OPEN-DRAIN is being used.We ship the part through Tape and Reel .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A total of 8 pins are included.The comparator consists of 8 pins.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 150μA .A current supply greater than 150μA may cause the comparator to malfunction.The device can be run with 5V power supplies.In general, temperatures higher than 125°C are not recommended.Comparator electronics will not be able to function at temperatures below -55°C .A comparator's maximum supply voltage is 16V volts.Using a voltage as low as 4V is possible for this comparator.For the output quality to be maintained, 2 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.The device is acceptable to pack by TR .
V62/06675-01XE Features
OPEN-DRAIN output capability
COMPARATOR amplifier
V62/06675-01XE Applications
There are a lot of Texas Instruments
V62/06675-01XE linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
