V62/09613-01XE Overview
In the package, you will find a VSSOP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 500μV as input offset voltage. You should keep the voltage gain at 13.98dB for the time being. On the buffer amps, there are 2 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -55°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The linear amplifier is packaged by using a TR axis. This electric component can work from a voltage of under 5.5V as far as supply voltage is concerned. A voltage of 1.8V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 2.75V volts when you conduct this part. The current is quiescent at 1.1mA. During testing, the instrumentation amplifier resistance should remain within a range of 240kOhm.
V62/09613-01XE Features
8 Pins
supply voltage of 5V
13.98dB voltage gain
Resistance of 240kOhm
V62/09613-01XE Applications
There are a lot of Texas Instruments
V62/09613-01XE Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
