V62/11621-01XE Overview
Packaged in a SOIC case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 9mV for this buffer op amp. As long as the supply current of the chip does not exceed 2.5mA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 4 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. For packing the buffer amplifier, the TR-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 36V. A high supply voltage of more than 30V is recommended for the instrumentation amplifier's supply voltage. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 35000.
V62/11621-01XE Features
14 Pins
supply voltage of 15V
V62/11621-01XE Applications
There are a lot of Texas Instruments
V62/11621-01XE Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
