VCA8617PAGT Overview

There is a 64-TQFP case package that contains the instrumentation amplifiers. An op amp of this type is a Variable Gain-type. The op amp is delivered to you in a Cut Tape (CT) case. The number of terminations approaches 64. In total, there are 64 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 3V. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. A total of 64 pins are present on the instrumentation amplifier. Op amp ic rates 650μV for input offset voltage. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . There should be no change in the voltage gain at 40dB. On the buffer amps, there are 8 channels that can be used. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential signals. There is a rating of 8 for the operating supply voltage of the buffer op amp. During testing, the buffer amplifier resistance should remain within a range of 4.5kOhm. An analog IC known as a ANALOG CIRCUIT is the other type of IC that is used in this op amp ic.

VCA8617PAGT Features

64 Pins
supply voltage of 3V
40dB voltage gain
Output Type: Differential
Resistance of 4.5kOhm

VCA8617PAGT Applications

There are a lot of Texas Instruments VCA8617PAGT Instrumentational OP Amps applications.

• Car stereo
• Weighing systems
• Video computer boards
• Voltage regulation circuit
• Tablets
• Fast A/D and D/A converters
• High input resistance broadband
• Scintillation detectors
• Signal filtering
• Integrator circuits