1pA 60 dB Instrumentational OP Amps 1.2V~10V ±0.6V~5V XC221A 5 Pins SC-74A, SOT-753
SOT-23
XC221A1100MR Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SC-74A, SOT-753
Number of Pins
5
Operating Temperature
-30°C~80°C
Packaging
Tape & Reel (TR)
Published
2007
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
5
ECCN Code
EAR99
Subcategory
Operational Amplifier
Packing Method
TAPE AND REEL
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
1
Base Part Number
XC221A
Pin Count
5
Output Type
Rail-to-Rail
Number of Circuits
1
Operating Supply Current
15μA
Supply Current-Max
0.023mA
Slew Rate
0.07V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
60 dB
Current - Input Bias
1pA
Voltage - Supply, Single/Dual (±)
1.2V~10V ±0.6V~5V
Input Offset Voltage (Vos)
20mV
Gain Bandwidth Product
210kHz
Voltage Gain
110dB
Low-Offset
NO
Frequency Compensation
YES
Low-Bias
YES
Micropower
YES
Programmable Power
NO
Wideband
NO
Power
NO
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
XC221A1100MR Product Details
XC221A1100MR Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. It consists of a total of 5 pins in total. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 20mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -30°C~80°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 15μA and 10 . The voltage gain should stay at 110dB. On this buffer amplifier, there are 1 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
XC221A1100MR Features
5 Pins 110dB voltage gain Output Type: Rail-to-Rail
XC221A1100MR Applications
There are a lot of Torex Semiconductor Ltd XC221A1100MR Instrumentational OP Amps applications.