XC6118N12AMR-G Overview

There are 5 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a lot of similarities between this IC management and other Voltage Detector products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 2V volt supply. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.8μA.

XC6118N12AMR-G Features

Voltage Detector type
Minimum supply voltage of 1V

XC6118N12AMR-G Applications

There are a lot of Torex Semiconductor Ltd XC6118N12AMR-G Voltage Supervisors applications.

• Transformer load monitoring equipment
• Digitally controlled LDO regulators circuit
• Military electronics
• Radar
• Insulation fault location system
• Analog circuit
• Data storage applications
• Automotive permanent magnet synchronous motors
• DC stabilized power supply module
• Personal computers