XC61GN1802HR-G Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). In this IC management you will find 2-SFN Exposed Pad functions for you to refer to. There are a lot of similarities between this IC power and other Voltage Detector products. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. There are 3 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. You can always use XC61G, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 3.6μA.

XC61GN1802HR-G Features

Voltage Detector type
Minimum supply voltage of 700mV

XC61GN1802HR-G Applications

There are a lot of Torex Semiconductor Ltd XC61GN1802HR-G Voltage Supervisors applications.

• Solar power charger
• Unattended substation automation
• External alarm
• Electronics installed in the vehicle
• Automotive power systems
• Power distribution systems of CCU
• Consumer electronics
• FPGA design
• DVR
• Magnetic resonance imaging