74VHC374FT Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. It is operating at a temperature of -40°C~125°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74VHC series. A frequency of 120MHzshould be the maximum output frequency. In total, there are 1 elements. There is a consumption of 4μAof quiescent energy. There have been 20 terminations. Power is supplied from a voltage of 5V volts. A JK flip flop with a 4pFfarad input capacitance is used here. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. It reaches the maximum supply voltage (Vsup) at 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. The flip flop contains 2ports.

74VHC374FT Features

Tape & Reel (TR) package
74VHC series

74VHC374FT Applications

There are a lot of Toshiba Semiconductor and Storage 74VHC374FT Flip Flops applications.

• Safety Clamp
• Frequency division
• Balanced Propagation Delays
• Divide a clock signal by 2 or 4
• Patented noise
• Single Up Count-Control Line
• Guaranteed simultaneous switching noise level
• Asynchronous counter
• Bounce elimination switch
• Dynamic threshold performance