TC74HC573APF Overview

In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. The package is in the form of Tube. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Latch. The electronic component is mounted according to the Through Hole method. A 2V~6V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the TC74HC series. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. 74HC573 is its family. In order to operate it, the supply voltage must be 4.5V. 20 pins are available on it. HC/UH is the family name of this electronic device. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It reaches 6V when the supply voltage (Vsup) reaches maximum. It is recommended that the supply voltage (Vsup) be greater than 2V.

TC74HC573APF Features

20-DIP (0.300, 7.62mm) package
TC74HC series
8 Bits
74HC573 family
20 pin count

TC74HC573APF Applications

There are a lot of Toshiba Semiconductor and Storage TC74HC573APF Latches applications.

• Pattern generators
• Network Switches
• Automotive HEV/EV Powertrain
• A/D converters
• Pseudo-random code generators
• Decade counting
• Sample and hold register
• General-Purpose Register
• Automatic test equipment
• Shift left register