TC75W56FK,LF Overview

In order to make transportation easier, it is packaged in 8-VFSOP (0.091, 2.30mm Width) .A comparator with an output type of Push-Pull is being used.We ship the part through Cut Tape (CT) .In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.There is 40μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is possible to input a maximum of 1pA current into the device.In general, temperatures higher than 85°C are not recommended.Comparator electronics will not be able to function at temperatures below -40°C .

TC75W56FK,LF Features

Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 40μA

TC75W56FK,LF Applications

There are a lot of Toshiba Semiconductor and Storage
TC75W56FK,LF linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications