TS1103-50EG6T Overview

A SOT-23-6 case is used to package the op amp. A Current Sense-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. In total, the buffer amplifier consists of 6 pins. There is an input offset voltage of 30μV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . You can run this op amp ic on 680nA . 33.98dB should be the voltage gain. A linear amplifier like this has 1 circuits on it. Op amp ic has 1 channels. To operate this buffer amplifier, the temperature must not be lower than -40°C. No temperature greater than 105°C should be used. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. We recommend that you use this electronic part with an 680nA supply in order to get the best performance from it. Under 25V is the minimum supply voltage for this electric component. It is advised to keep the op amp's supply voltage higher than 2V. Conduct linear amplifier under the dual suuply voltage of 27V.

TS1103-50EG6T Features

33.98dB voltage gain

TS1103-50EG6T Applications

There are a lot of Touchstone Semiconductor TS1103-50EG6T Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Switching amplifier
• Power control
• pH (acidity)
• High speed sample
• Inverse/same-phase proportional circuit
• Power generator
• single/dual op amp sum and difference circuits
• Differentiator circuits
• Integrator circuits