TS3006ITD833T Overview

In the packaging with the 8-WDFN Exposed Pad, there is a programmable timer enclosed in the package. [0] is the frequency of the programmable timer.It is used to pack in Cut Tape (CT) case. There is no recommended mounting type other than Surface Mount.The programmable timer is capable of providing a voltage of 1.55V~5.25V in its output, which can be used to control the clock.The type of chips can be divided into Oscillator, Silicon. The operating temperature of this timer clock is -40°C~85°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 2.7μA. The operating supply voltage is rated at 2.7μA voltage. The NanoWatt Analog? relates to the digital timer's series. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. It is based on TS3006. The timer clock contains 8 pins. The digital timer's operating supply voltage is rated 3V voltage. The minimum supply voltage of the chip must not be lower than 1.55V. The supply voltage of this chip should not exceed 5.25V. The number of Timers/Counters on the device is 1.

TS3006ITD833T Features

Operate frequency at 9kHz~300kHz
Package / Case: Cut Tape (CT)
Mounting Type:Surface Mount
Current - Supply：2.7μA
Max Operating temperature at -40°C
1 Timers/Counters

TS3006ITD833T Applications

There are a lot of Touchstone Semiconductor TS3006ITD833T Programmable Timers & Oscillators applications.

• Clutch Actuator circuit
• Remote Sensors
• White Goods
• Delay circuits
• High Vibration, High Acceleration Environments
• Intruder Detection
• Domestic appliances
• Battery Powered Systems
• Car Door Handle circuit
• Remote current sensor