PI2211-00-QAIG Overview

In the 24-VFQFN Exposed Pad package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 24 terminations total to three.Device QUAD is located at the terminal position.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~125°C.Apps for General Purpose are available on the device.A feature of Auto Retry, Thermal Limit describes it.Using a 900mV~14VV power source should be able to power the device.The PI2211 family includes it.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO programmable features.Presently, there is a sufficient supply of 12mA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 0.9V so that the device can function normally.There is a maximum current requirement of 20mA for it to operate.

PI2211-00-QAIG Features

Features of Auto Retry, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO

PI2211-00-QAIG Applications

There are a lot of Vicor Corporation
PI2211-00-QAIG hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems