110RKI120PBF Overview

SCRs thyristor is the average forward current that can flow through the SCR at SCRs thyristors rated average state (A), which is 110.Maintaining the RMS on-state current under 172 A is essential for the device's normal operation.An off-state voltage that is repetitive is the maximum voltage that can cross the device, and this device has a repetitive peak voltage of 1200 V.Diodes have a maximum repetitive reverse voltage (Vrrm) which expresses the maximum amount of voltage they can withstand in reverse-bias mode.Holding current (hypostatic) is the minimum amount of current that passes through a circuit to remain in an 'ON' state, and it may be 200 mA.A normal on-state voltage (V) should be [email protected] unblocked (On) state is converted into a blocked (Off) state by gate trigger current. This device has a DC gate trigger current-Max of 120 mA.Surge current rating indicates the maximum non-repetitive or surge current the SCR can withstand for a limited period of time during its life.The repetition peak reverse voltage represents the maximum value at any given instant, including all repetitive transient voltages.On-state current (A) describes the maximum current that can flow in the device at a specified case temperature, and on-state current (A) of this device is 172.

110RKI120PBF Features

the rated average on-state current is 110
the repetitive peak off-state voltage of this device is 1200 V
its current can be 200 mA
the peak on-state voltage (V) should be 1.57@350A

110RKI120PBF Applications

There are a lot of Vishay
110RKI120PBF applications of SCRs thyristors.

• DC motor control and drives
• Battery charges
• Welders
• Power converters
• Lighting control
• Heat and temperature control
• Motor starters
• DC motor controls - AC motor controls
• Uninterruptable power supplies
• Wind mill