16TTS08PBF Overview

In an SCR, the rated average on-state current (A) is the maximum repeated average value of forward current that can flow through the device, and it is 10.The RMS current is a measure of the average strength of the current, disregarding its direction. Its RMS current (Irms) is 16 A ohms.In order for the device to operate normally, the RMS on-state current should be maintained at 15.7 A.This device's repetitive peak off-state voltage is 800 V, the maximum peak voltage it allows across its off-state.Repetitive reverse voltage is the maximum voltage the diode can withstand in reverse-bias mode, and for this device, the maximum repetitive reverse voltage (Vrrm) is 800 V.During the 'ON' state, the holding current (hypostatic) can be 100 mA, as it is the minimum current which must pass through a circuit for it to stay in the 'on' state.During normal operation, the peak on-state voltage (V) should be [email protected] trigger current is the amount of gate current required for a device to switch from its blocked (Off) state to its unblocked (On) state, and DC gate trigger current-Max is 60 mA.SCRs with surge current ratings of 200 can withstand peak non-repetitive or surge current during a limited number of cycles during their lifespan.Repeated peak reverse voltage equals the maximum amount of reverse voltage within an instantaneous period of time, including any repetitive transient voltages. It is 800 V.On-state current (A) is a unit of power that is the maximum current allowed for a given case temperature in a device, and this device's on-state current (A) is 16.

16TTS08PBF Features

the rated average on-state current is 10
its RMS current (Irms) is 16 A
the repetitive peak off-state voltage of this device is 800 V
its current can be 100 mA
the peak on-state voltage (V) should be 1.4@10A

16TTS08PBF Applications

There are a lot of Vishay
16TTS08PBF applications of SCRs thyristors.

• DC motor control and drives
• Battery charges
• Welders
• Power converters
• Lighting control
• Heat and temperature control
• Motor starters
• DC motor controls - AC motor controls
• Uninterruptable power supplies
• Wind mill