VS-40TPS12APBF Overview

Despite its direction, the RMS current (Irms) describes the average strength of the current.This device has a repetitive peak off-state voltage of 1200V, which is its maximum peak voltage across the device.Its maximal repetitive reverse voltage (Vrrm) is 1.2kV, meaning it can withstand the maximum amount of voltage in reverse-bias mode.Holding current (hypostatic) for electrical, electromagnetic, and electronic devices is the minimum current passing through a circuit in order for it to remain in an "ON" state.This thyristor has a forward voltage of 1.85V that is needed to cause current to flow across the diode.Insulation effectiveness can be measured by leakage current, with a maximal leakage current of 10mA.This device's DC gate trigger current-Max is 40mA, which is what is required to switch the device from the blocked (Off) state to the unblocked (On) state.

VS-40TPS12APBF Features

its RMS current (Irms) is 55A
the repetitive peak off-state voltage of this device is 1200V
its current can be 150mA
this thyristors has 1.85V forward voltage
its maximal leakage current can be 10mA

VS-40TPS12APBF Applications

There are a lot of Vishay Semiconductor Diodes Division
VS-40TPS12APBF applications of SCRs thyristors.

• DC motor control and drives
• Battery charges
• Welders
• Power converters
• Lighting control
• Heat and temperature control
• Motor starters
• DC motor controls - AC motor controls
• Uninterruptable power supplies
• Wind mill