VBP104S Overview

These photodiodes are packaged in the Digi-Reel® to protect them from damage. The photodiodes are put into 2-SMD, Gull Wing packages for safety protection. The voltage for the photodiodes should not exceed 60V in reverse-bias mode on a continual basis. The photodiodes have 2 pins. The photodiodes could release 215mW heat within a circuit. The reverse anode voltage for the photodiodes should be 60V. In general, the maximum heat released by the photodiodes should be 215mW in a circuit. In the DC circuit, the photodiodes can work properly with the reverse voltage of 60V. The voltage needed to get current to flow across a photodiode should be 1.3V. The breakdown voltage should be 60V to ensure photodiodes work. Even in the absence of light input, a photodiode occurs 2nA current.

VBP104S Features

Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~100°C
Packaging: Digi-Reel®
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 430nm ~ 1100nm
Viewing Angle: 130°

VBP104S Applications

There are a lot of Vishay Semiconductor Opto Division
VBP104S Photodiodes applications.

• High speed photo detector
• Infrared remote control
• Infrared data transmission
• Photo interrupters
• Shaft encoders
• Electronic Equipment
• Industrial Automation
• Machine Controls
• Light Barriers
• Vision Controls