DG201HSDY-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Search with DG201 if you are looking for analog multiplexer variants. It has an internal resistance of 90Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 13V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10mA. A digital multiplexer may suffer damage if voltage is applied above 10mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. In the case of dual power supplies, you should connect at least 7V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 16.5V operating voltages for the electrical part. There are 4 inputs to be operated.

DG201HSDY-E3 Features

1 Channels
Switch Circuit: SPST - NC
10mA Supply Current

DG201HSDY-E3 Applications

There are a lot of Vishay Siliconix
DG201HSDY-E3 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems