Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG212BDY-T1-E3

  • DG212BDY-T1-E3
  • DG212BDY-T1-E3

DG212BDY-T1-E3

DG212BDY-T1-E3

Vishay Siliconix

300ns, 200ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG212 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG212BDY-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 13 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 547.485991mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2016
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 85Ohm
Terminal Finish MATTE TIN
Subcategory Multiplexer or Switches
Max Power Dissipation 640mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DG212
Output SEPARATE OUTPUT
Pin Count 16
Power Supplies 512/+-15V
Number of Channels 1
Max Supply Voltage 25V
Min Supply Voltage 4.5V
Operating Supply Current 10μA
Nominal Supply Current 50μA
Power Dissipation 640mW
Max Supply Current 10μA
Throw Configuration SPST
Turn On Delay Time 300 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 4.5V~25V ±4.5V~22V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 200 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 85Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 90 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
On-state Resistance Match-Nom 2Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 300ns, 200ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 2 Ω
Crosstalk -95dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 85Ohm
Normal Position NO
Height 1.55mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $1.393106 $1.393106
10 $1.314251 $13.14251
100 $1.239860 $123.986
500 $1.169679 $584.8395
1000 $1.103471 $1103.471
DG212BDY-T1-E3 Product Details

DG212BDY-T1-E3 Overview


Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with DG212. This digital multiplexer has 85Ohm internal resistance. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 25V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 4.5V. 10μA current would be enough for this multiplexer to operate. If put voltage greater than 10μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. You should attach at least 4.5V voltage if you are using dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical component supports 4 inputs. This electronic component presents a Drain to Source resistance of 85Ohm.

DG212BDY-T1-E3 Features


1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
Drain-to-Source resistance: 85Ohm


DG212BDY-T1-E3 Applications


There are a lot of Vishay Siliconix
DG212BDY-T1-E3 Analog Switches & Multiplexers ICs applications.


  • High-Voltage
  • Transmit
  • Low-Voltage
  • Isolation
  • Medical
  • Imaging
  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition

Related Part Number

MAX4638ESE+
Maxim Integrated
MAX4638ESE+
$0 $/piece
ISL84762IU
Renesas Electronics America Inc.
ISL84762IU
$0 $/piece
ADG774BRZ-REEL7
Analog Devices Inc.
ADG774BRZ-REEL7
$0 $/piece
MAX4542CSA+
Maxim Integrated
MAX4542CSA+
$0 $/piece
74HCT4053D
Toshiba Semiconductor and Storage
74HCT4053D
$0 $/piece
MAX14550AEETB+T
Maxim Integrated
MAX14550AEETB+T
$0 $/piece
DG409CY+
Maxim Integrated
DG409CY+
$0 $/piece
NX3L1G3157GW-Q100H
NXP USA Inc.
NX3L1G3157GW-Q100H
$0 $/piece
DG613EEY-T1-GE4
Vishay Siliconix
DG613EEY-T1-GE4
$0 $/piece
M74HCT4052ADTR2G
ON Semiconductor
M74HCT4052ADTR2G
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News