DG2612DX-T1-E3 Overview

Due to its SOT-563, SOT-666 packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 6. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. The electronic part body is injected with 6 pins. A SPDT switching circuit is used for these analog switches. It consists of 1 circuits. Try searching with DG2612 if you're looking for variants. As far as internal resistance is concerned, it has 1.4Ohm. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. 1.8V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 10nA would be sufficient for this switch device. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.

DG2612DX-T1-E3 Features

1 Channels
Switch Circuit: SPDT
10nA Supply Current

DG2612DX-T1-E3 Applications

There are a lot of Vishay Siliconix DG2612DX-T1-E3 Analog Switches & Multiplexers ICs applications.

• Cable PC
• Multi-Line E1 Interface Cards
• Power routing
• 65 V DACs
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Mechanical reed relay replacement
• SDH
• Ultrasound
• Digital cross connects (DSX-1)
• Video signal routing