DG2616DN-T1-E4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 10-VFDFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 10 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 10 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. Search with DG2616 if you are looking for analog multiplexer variants. It has an internal resistance of 7Ohm. The functions of 10 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Single supply type digital switch with a low cost. 1.5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 100nA. A voltage of 1.5V~3.6V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 300μA. There are 2 inputs to be operated. The Drain to Source resistance of this electronic component is 4.2Ohm. The analog switch ics has 4 outputs.

DG2616DN-T1-E4 Features

1 Channels
Switch Circuit: SPDT
100nA Supply Current
Drain-to-Source resistance: 4.2Ohm

DG2616DN-T1-E4 Applications

There are a lot of Vishay Siliconix
DG2616DN-T1-E4 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems