DG271BCJ Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 16 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 4. In this multiplexer, the internal resistance is 50Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual supply. 13V is the lowest voltage the electrical component should receive. Putting voltage greater than 7.5mA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. With dual power supplies, you should attach at least 7V. The electrical part can be operated at 15V voltage levels.

DG271BCJ Features

Switch Circuit: SPST - NC

DG271BCJ Applications

There are a lot of Vishay Siliconix
DG271BCJ Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones