DG2741DS-T1-E3 Overview

As the electronic part is packed in SOT-23-8, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 8. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Try searching for the analog switch ic with DG2741 if you are looking for variants. The internal resistance of this digital multiplexer is 8Ohm. For details about the functions of 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 1.5V. The analogue multiplexer could operate on 10nA current. Using a single voltage supply, this switch device consumes 1.5V~3.6V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Among the inputs that can be operated are the 2 inputs. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION.

DG2741DS-T1-E3 Features

1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Additional Features: VIDEO APPLICATION

DG2741DS-T1-E3 Applications

There are a lot of Vishay Siliconix DG2741DS-T1-E3 Analog Switches & Multiplexers ICs applications.

• Optical Applications
• Transmit
• Industrial and process control systems
• Avionics
• Communication systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• FTTH
• PDH Multiplexers
• Signal routing between systems
• Audio and video signal routing