DG3015DB-T2-E1 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFBGA. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 2:2 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using DPDT switching circuits. This multiplexer is composed of 2 circuits. Try searching with DG3015 to find analog multiplexer variants. It has an internal resistance of 1.2Ohm. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.3V. Analog switch ics with Single supply type are cost-effective. It is recommended to use 2.7V as the lowest voltage for the electrical part. For this digital switch to work, 1μA current would suffice. A voltage of 2.7V~3.3V is required to drain this analog switch from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.

DG3015DB-T2-E1 Features

2 Channels
Switch Circuit: DPDT
1μA Supply Current

DG3015DB-T2-E1 Applications

There are a lot of Vishay Siliconix DG3015DB-T2-E1 Analog Switches & Multiplexers ICs applications.

• Communication systems
• Access Concentrators
• CSU
• Power routing
• Transmit
• Audio signal routing
• Imaging
• Multiplexers
• ATM
• Video signal routing