DG301AAA Overview

Due to its TO-100-10 Metal Can packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -55°C~125°C TA. There are 10 terminations totally. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electronic part can be found in the 10 series. Based on SPDT switching circuits, these analog multiplexers work. A total of 1 circuits make up this switch device. There is 50Ohm internal resistance in this digital multiplexer. To find out what the functions of 10 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 13V. The analogue multiplexer may be damaged if voltage is greater than 500μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 7V. The electronic component can function from 15V. There are 2 inputs to be operated.

DG301AAA Features

Switch Circuit: SPDT

DG301AAA Applications

There are a lot of Vishay Siliconix DG301AAA Analog Switches & Multiplexers ICs applications.

• HDTV
• Imaging
• MP3 players
• Audio signal routing
• Battery-powered systems
• Public switching systems
• SDH/SONET multiplexers
• Intelligent PBX
• Central office
• Cable Telephony – NIU, Set-Top Box, Home Side Box