200ns, 150ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 1nA 15V 16-DIP (0.300, 7.62mm)
SOT-23
DG308ACJ-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Number of Pins
16
Weight
1.627801g
Operating Temperature
0°C~70°C TA
Packaging
Tube
Published
2015
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
100Ohm
Terminal Finish
MATTE TIN
Subcategory
Multiplexer or Switches
Max Power Dissipation
470mW
Technology
CMOS
Number of Functions
4
Supply Voltage
15V
Base Part Number
DG308
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
15V
Number of Channels
1
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
10μA
Power Dissipation
470mW
Max Supply Current
10μA
Throw Configuration
SPST
Turn On Delay Time
200 ns
Number of Inputs
4
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
150 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
100Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
78 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
11pF 8pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
200ns, 150ns
Charge Injection
-10pC
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height
3.81mm
Length
21.33mm
Width
7.11mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$3.212312
$3.212312
10
$3.030483
$30.30483
100
$2.858947
$285.8947
500
$2.697119
$1348.5595
1000
$2.544453
$2544.453
DG308ACJ-E3 Product Details
DG308ACJ-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around 0°C~70°C TA are extended for operation. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with DG308 to find analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 13V. 10μA current would be enough for this multiplexer to operate. If you put voltage higher than 10μA on the digital multiplexer, damage may occur. There is no problem with using dual supply voltage, but it should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This electrical part is compatible with 15V operating voltages. The electrical component supports 4 inputs.
DG308ACJ-E3 Features
1 Channels Switch Circuit: SPST - NO 10μA Supply Current
DG308ACJ-E3 Applications
There are a lot of Vishay Siliconix DG308ACJ-E3 Analog Switches & Multiplexers ICs applications.
Fault Tolerant Systems
USB 1.1 signal switching circuits
DSUs
High speed data transmission line cards
Imaging
Voice over IP/DSL – Integrated Access Devices, Smart