This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SPST - NO/NC switching circuits. Try searching for DG403 variants of the analog switch ic. In this multiplexer, the internal resistance is 55Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 36V. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 13V. For this multiplexer to operate, 1mA current would be sufficient. Putting voltage greater than 500μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. A SPDT analog IC is integrated into the board. The electronic component can function from 15V. 4 outputs are included in the analogue multiplexer.
DG403BDY-E3 Features
2 Channels Switch Circuit: SPST - NO/NC 1mA Supply Current
DG403BDY-E3 Applications
There are a lot of Vishay Siliconix DG403BDY-E3 Analog Switches & Multiplexers ICs applications.